Description
S5700-52X-LI-AC appearance
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s, and must use an Ethernet cable. Table 4-108 describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.
10GE SFP+ port
A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. Table 4-109 describes the attributes of a 10GE SFP+ Ethernet optical port.
Console port
The console port is connected to a console for on-site configuration. The port must use a console cable. The console port is used when a switch is powered on for the first time. For details about the attributes of a console port, see Table 4-110.
Mini USB port
The mini USB port is connected to a console for on-site configuration. When both the Mini USB and console port have a cable connected, only the Mini USB port works.
Indicator Description
The S5700-52X-LI-AC has the same types of indicators as the S5700-28X-LI-AC. For details, see Indicator Description.
Power Supply Configuration
The S5700-52X-LI-AC has a built-in power module and does not support pluggable power modules. It can connect to an RPS1800 power supply for power redundancy.
Figure 4-43 shows the power supply mode of a built-in AC power module. The built-in AC power module (PWR) receives power from an external power source and provides a 12 V output to the chassis.
Figure 4-43 Power supply mode of a built-in AC power module
Heat Dissipation
The S5700-52X-LI-AC has two built-in fans for forced air cooling. The airflow direction is left-to-right.
This figure only shows the airflow direction and does not depict the actual device.
Reviews
There are no reviews yet.