Description
ADVA FSP150CP Optical Fibre Access Switch F150/BT-/CP/GIG/2AC 0078993005 + Ears
Specification
Access capacity
- Two ports:
- one dedicated 100/1000BaseX (SFP) port
- one 10/100/1000BaseT or 100/1000BaseX (SFP) port
Network interface
- One 10/100/1000BaseT or 100/1000BaseX (SFP) port
- Two 100/1000BaseX (SFP) ports
- Two 10/100/1000BaseT or 100/1000BaseX (SFP) ports
- One network port can be defined as an additional access port
Network interface redundancy
- IEEE 802.1AX link aggregation – active/standby or load balancing
- ITU-T G.8032 Ethernet ring protection
Synchronization
- ITU-T G.8261 /G.8262 /G.8264 Synchronous Ethernet on all interfaces
- Sync status message support
- IEEE 1588v2 Precision Time Protocol
- ITU-T G.8265.1 and G.8275.1 PTP Telecom Profile
- BITS-in and BITS-out
- BITS sync status messaging
- 1 PPS in/out
- 10MHz
VLAN support
- 4096 VLANs (IEEE 802.1Q customer-tagged) and stacked VLANs (Q-in-Q service provider tagged)
- 2-tag management (push/pop/ swap) for c-tag and s-tag
- IEEE 802.1ad provider bridging (c-tag, s-tag)
- Ethertype translation
- 8 1,2 / 32 3-5/ 64 6-10 Ethernet virtual circuits (EVC)
- 9612 Byte per frame MTU transparency
- EoMPLS encapsulation
Layer 2 traffic management
- Acceptable client frame policy: tagged or untagged
- Service classification based on IEEE 802.1p, 802.1Q and IPTOS/DSCP
- VLAN tag priority mapping (IEEE 802.1ad PCP encoding)
- MEF-compliant policing (CIR/CBS/EIR/EBS) with threecolor marking and eight classes of service
- Port shaping on transmit for both client and network ports
- MEF 10.3 hierarchical policing with token-share envelopes
- DiffServ supporting WFQ/SP mix
Layer 3 traffic management
- L2-L4 access control lists (ACL) for classification
- VRF-lite virtual routing and forwarding supporting IPv4 and IPv6
- BGP and OSPF dynamic routing
- DHCP relay agent
- DCSP remarking
Reviews
There are no reviews yet.